Flat Pelmet for Roller Blinds
Order in the next [totalHours] hours %M minutes to get this to you between and
1. Measure the inside width of the recess.
2. Measure the height from the top of the recess to the bottom of the rolled-up blind.
3. Please identify your roller blind brackets installation: top fix or face fix.
4. If your installation is face-fix, measure the depth from the recessed wall to the front of your blind bracket.
1. Remove your roller blind.
2. Remove one screw and loosen the second.
3. Slide the tab of the Cov-A-Blind fitting behind your blind bracket.
4. Reisert the screw and tighten both. Then repeat steps 2, 3 and 4 with the other bracket.
5. Refit your roller blind.
6. Remove the green release papers from each metal plate.
7. Place each metal plate lip on top of the circular magnet.
8. Remove the red release papers from the back of the pelmet.
9. Place the top of the pelmet on the ceiling of your recess, then connect the adhesives with a forward motion.
1. Remove your roller blind.
2. Remove one screw and loosen the second.
3. Slide the tab of the Cov-A-Blind fitting behind your blind bracket.
4. Reisert the screw and tighten both. Then repeat steps 2, 3 and 4 with the other bracket.
5. Refit your roller blind.
6. Remove the green release papers from each metal plate.
7. Place each metal plate lip on top of the circular magnet.
8. Remove the red release papers from the back of the pelmet.
9. Place the top of the pelmet on the ceiling of your recess, then connect the adhesives with a forward motion.