Flat Pelmet for Vertical Blinds
Please ensure that the distance between the back of the headrail and the recessed wall is at least 15mm (0.59 inches) before buying this item.
Please ensure that the distance between the back of the headrail and the recessed wall is at least 15mm (0.59 inches) before buying this item.
Compatible with all makes of recess-mounted vertical blinds.
We will cut the pelmet to size. We will cut pelmets 2mm smaller than the exact inside width of your recess to ensure easy fitting.
No new screws are needed to fix the Cov-A-Blind brackets. Pelmets can be held securely by magnets attiring metal plates to attach using our strong adhesive.
A pelmet panel completes the vertical blind with a sleek, contemporary look.
GB Patent Application: GB1815103.5. International Patent Application: PCT/EP2019/074252
1. Loosen the screw of the Cov-A-Blind bracket.
2. Slide the Cov-A-Blind bracket above the headrail on one side (left or right).
3. Re-tighten the screw of the Cov-A-Blind bracket. Then repeat steps 1, 2 and 3 with the other bracket on the other side of the headrail.
4. Remove the green release papers from each metal plate.
5. Place each metal plate lip on top of the circular magnet.
6. Remove the red release papers from the back of the pelmet.
7. Place the top of the pelmet on the ceiling of your recess, then connect the adhesives with a forward motion.